Welcome to: Electronic protection components factory
Service Hotline
0769-83811196
Current Location:Home > News > Company News >

240v Fuse

文章出处:FUSE manufacturers Author:Yaxun Electronics Popularity: Time:2018-02-09 14:10 【Big Middle Small
120v connection 240v connection insulated buss type connector fuse ...
120v connection 240v connection insulated buss type connector fuse ...
D. ALL FUSE HOLDERS SHALL BE COOPER BUSSMAN "TRON", RATED 30A AT 600V, WATERTIGHT, IN-LINE,. SINGLE TYPE HEB-AB FOR 120V, OR DOUBLE TYPE HEX-AB FOR 240V, FOR 13/32" x 1.5" FUSE, OR. APPROVED EQUAL. INCLUDE INSULATING BOOTS. EXEMPT MATERIAL. F. ALL FUSES SHALL BE ...

16a 240v Pilot Type Fuse, Kit Kat Fuse Carrier - Virat Electrics Shop ...
Virat Electrics Shop offering 16a 240v Pilot Type Fuse, Kit Kat Fuse Carrier in Chennai, Tamil Nadu. Get best price and read about company and get contact details and address.

Plugs & Fuses, Plug Covers | Wiring Accessories | Screwfix.com
Plugs & Fuses, Plug Covers | Wiring Accessories | Screwfix.com
Purchase plugs and fuses at Screwfix.com in order to keep all your appliances running, there is nothing worse than a fuse blowing and having no replacements. | .

Is it ok to replace 125v glass fuses with 250v glass fuses of the same ...
Fuses are designed to protect over-current, not over-voltage. Therefore as long as the fuse amperage is sized appropriately and as long as your fuse voltage meets or exceeds your application voltage the fuse will safely protect. The best way to remember this, is the voltage listed on the fuse is the maximum rated voltage the ...

Anchor Roma Fuse Unit 21146, White, 10 and 16A 240V ...
Anchor Roma Fuse Unit 21146, White, 10 and 16A 240V ...
This is a specialty range of electrical accessories by Roma Anchor which are available for residential commercial and hospitality use. This white Anchor Roma Fuse Unit 21146 10 and 16A 240V will prove to be the best choice for you if you're willing to opt for stylish electrical units that will serve you for a long period of time.

Newlec Domestic Fuse, Consumer Unit Fuse, 30A, 240V AC
Diameter, 12.7mm. Colour, Red. Type, Consumer Unit Fuse. Length, 29mm. Colour Code, Red. Width, 12.7mm. Current Rating, 30A. Voltage Rating, 240V AC. Size, 12.70mm x 29mm ...

All Trade Direct 28 Mixed Amp Domestic 240V Household Mains Plug ...
All Trade Direct 28 Mixed Amp Domestic 240V Household Mains Plug ...
Welcome to the AllTrade Direct Amazon Shop Trade supplies now available to all!!For more information, please visit our Amazon Shop Homepage for more fantastic products at trade prices.This listing is for a new pack of28 Mixed AMP Domestic 240V Mains Plug Top Fuses. This pack is consists of:- 1Amp x 4 2 Amp x 4 3 ...

240V circuit fuses - Int'l Association of Certified Home ...
240V circuit fuses. The international Association of Certified Home Inspectors (InterNACHI) is a non-profit organization of the nation's best real estate inspection professionals. NACHI.ORG helps a home inspector become certified.

FUSE
FUSE
In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby interrupting the current. It is a sacrificial device; once a fuse has operated it is an open circuit, and it must be replaced or rewired, depending on type.
Fuses have been used as essential safety devices from the early days of electrical engineering. Today there are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity and response times, depending on the application. The time and current operating characteristics of fuses are chosen to provide adequate protection without needless interruption. Wiring regulations usually define a maximum fuse current rating for particular circuits. Short circuits, overloading, mismatched loads, or device failure are the prime reasons for fuse operation.

Thermal fuse
Thermal fuse
Thermal fuse is a cutoff which uses a one-time fusible link. Unlike a thermal switch which may automatically reset itself when the temperature drops, the thermal fuse is more like an electrical fuse: a single-use device that cannot be reset and must be replaced when it fails or is triggered. A thermal fuse is used when the overheating is a result of a rare occurrence, such as failure requiring repair (which would also replace the fuse) or replacement at the end of service life.
One mechanism is a small meltable pellet that holds down a spring. When the pellet melts, the spring is released, separating the contacts and breaking the circuit. The Tamura LE series, NEC Sefuse SF series, Microtemp G4A series, and Hosho Elmwood D series, for example, may use alloy pellets that contain copper, beryllium, and silver to melt at a precise temperature. is a cutoff which uses a one-time fusible link. Unlike a thermal switch which may automatically reset itself when the temperature drops, the thermal fuse is more like an electrical fuse: a single-use device that cannot be reset and must be replaced when it fails or is triggered. A thermal fuse is used when the overheating is a result of a rare occurrence, such as failure requiring repair (which would also replace the fuse) or replacement at the end of service life.
One mechanism is a small meltable pellet that holds down a spring. When the pellet melts, the spring is released, separating the contacts and breaking the circuit. The Tamura LE series, NEC Sefuse SF series, Microtemp G4A series, and Hosho Elmwood D series, for example, may use alloy pellets that contain copper, beryllium, and silver to melt at a precise temperature.

Resettable fuse
Resettable fuse
polymeric PTC device is made up of a non-conductive crystalline organic polymer matrix that is loaded with carbon black particles
[2] to make it conductive. While cool, the polymer is in a crystalline state, with the carbon forced into the regions between crystals, forming many conductive chains. Since it is conductive (the "initial resistance"),
[3] it will pass a current. If too much current is passed through the device the device will begin to heat. As the device heats, the polymer will expand, changing from a crystalline into an amorphous state.
[4] The expansion separates the carbon particles and breaks the conductive pathways, causing the device to heat faster and expand more, further raising the resistance.
[5] This increase in resistance substantially reduces the current in the circuit. A small (leakage) current still flows through the device and is sufficient to maintain the temperature at a level which will keep it in the high resistance state.  Leakage current can range from less than a hundred mA at rated voltage up to a few hundred mA at lower voltages. The device can be said to have latching functionality.[
6] The hold current is the maximum current at which the device is guaranteed not to trip. The trip current is the current at which the device is guaranteed to trip.
[7]When power is removed, the heating due to the leakage current will stop and the PPTC device will cool. As the device cools, it regains its original crystalline structure and returns to a low resistance state where it can hold the current as specified for the device.
[8] This cooling usually takes a few seconds, though a tripped device will retain a slightly higher resistance for hours, slowly approaching the initial resistance value. The resetting will often not take place even if the fault alone has been removed with the power still flowing as the operating current may be above the holding current of the PPTC. The device may not return to its original resistance value; it will most likely stabilize at a significantly higher resistance (up to 4 times initial value). It could take hours, days, weeks or even years for the device to return to a resistance value similar to its original value, if at all.
[9]A PPTC device has a current rating and a voltage rating.

Fuse Holder
Fuse Holder
Automotive and Commercial Vehicle Fuse Holders. Fuseholders for automotive style fuses including MINI, ATO, MAXI, MIDI, MEGA, JCASE and Universal Glass Fuses. Fuseholders are available for In-Line, Bolt-Down, Panel Mount and PCB applications.

Automotive Fuses
Automotive Fuses
Automotive fuses are a class of fuses used to protect the wiring and electrical equipment for vehicles. They are generally rated for circuits no higher than 32 volts direct current, but some types are rated for 42-volt electrical systems. They are occasionally used in non-automotive electrical products.

Relevant Information